Interspecific mating of the introduced bumblebee <Emphasis Type="Italic">Bombus terrestris</Emphasis> and the native Japanese bumblebee <Emphasis Type="Italic">Bombus hypocrita sapporoensis</Emphasis> results in inviable hybrids

The bumblebee Bombus terrestris is not only an effective pollinator, but also a potential invasive alien species outside its native range. Recently, nearly 30% of queens of the Japanese native species Bombus hypocrita sapporoensis and B. hypocrita hypocrita were estimated to copulate with B. terrestris males in the field, suggesting that indigenous bumblebees could be genetically deteriorated through hybrid production with the introduced species. In this study, we evaluated hybrid production between the introduced B. terrestris and the indigenous B. hypocrita sapporoensis under laboratory conditions. The hatching rate of eggs derived from interspecific matings was 0% and 8.6% depending on the direction of the cross, which was significantly lower than that from intraspecific matings of B. terrestris (76.9%) and B. hypocrita sapporoensis (78.9%). Genetic studies using microsatellite markers revealed that both haploid and diploid individuals were present in the egg stage, whereas all hatched larvae were haploid. In addition, histological studies revealed that eggs derived from interspecific matings terminated development 2 days after oviposition. These results strongly suggested that eggs derived from interspecific matings are inviable due to post-mating isolation mechanisms. Mass release of exotic pollinators could cause serious population declines of native bumblebee species.     

Animals on marine flowers: does the presence of flowering shoots affect mobile epifaunal assemblage in an eelgrass meadow?

Eelgrass, Zostera marina, produces two types of shoots: morphologically simple vegetative shoots and highly branched flowering (reproductive) shoots, the latter found only in summer months. We examined whether the abundance and diversity of mobile epifaunal assemblage are affected by the presence of flowering shoots in an eelgrass meadow of Otsuchi Bay, northeastern Japan. Comparisons of epifauna in natural vegetation revealed that density and species richness did not differ significantly between sites consisting of both flowering and vegetative shoots, and those only of vegetative shoots. A transplant experiment, conducted to examine the colonization rates of epifauna to defaunated eelgrass planted with different combination of vegetative and flowering shoots, showed no obvious variation in abundance and species richness. At species level, the density of some species such as a tanaid Zeuxo sp. and a polychaete Platynereis sp. was higher at sites and/or treatments with flowering shoots, whereas that of some gastropods, such as Lirularia iridescens and Siphonacmea oblongata was higher at sites without flowering shoots. The species-specific response led to dissimilarity of epifaunal assemblage between sites and among treatments with different densities of vegetative and flowering shoots. Similar patterns observed for natural vegetation and the transplant experiment suggest that the variation in assemblage structure is caused by habitat selection of each species, for example, the utilization of flowering shoots as feeding ground and nursery by Zeuxo sp.     

An estimate of the conversion rates of SO2 to SO2-4 and NO2 to HNO3+ NO3- for the evaluation air pollution in Beijing

The conversion rates of SO₂ to SO^2-₄ and NO₂ to HNO₃₊NO₃- are estimated from the field-data obtained in Beijing in summer, 1988. The results show that the conversion rate of NO₂ is about four times as much as that of SO₂; The conversion rates have a diurnal variation in a day. On the average, the rate of SO₂ is estimated to be 4.7% h^-1 during the daytime and 3.4% h^-1 during the nighttime. Similarly, the rate of NO₂ is estimated to be 17.2% h^-1 and 12% h^-1 respectively.     

Effects of wastewater disinfection on waterborne bacteria and viruses.

Wastewater disinfection is practiced with the goal of reducing risks of human exposure to pathogenic microorganisms. In most circumstances, the efficacy of a wastewater disinfection process is regulated and monitored based on measurements of the responses of indicator bacteria. However, inactivation of indicator bacteria does not guarantee an acceptable degree of inactivation among other waterborne microorganisms (e.g., microbial pathogens). Undisinfected effluent samples from several municipal wastewater treatment facilities were collected for analysis. Facilities were selected to provide a broad spectrum of effluent quality, particularly as related to nitrogenous compounds. Samples were subjected to bench-scale chlorination and dechlorination and UV irradiation under conditions that allowed compliance with relevant discharge regulations and such that disinfectant exposures could be accurately quantified. Disinfected samples were subjected to a battery of assays to assess the immediate and long-term effects of wastewater disinfection on waterborne bacteria and viruses. In general, (viable) bacterial populations showed an immediate decline as a result of disinfectant exposure; however, incubation of disinfected samples under conditions that were designed to mimic the conditions in a receiving stream resulted in substantial recovery of the total bacterial community. The bacterial groups that are commonly used as indicators do not provide an accurate representation of the response of the bacterial community to disinfectant exposure and subsequent recovery in the environment. UV irradiation and chlorination/dechlorination both accomplished measurable inactivation of indigenous phage; however, the extent of inactivation was fairly modest under the conditions of disinfection used in this study. UV irradiation was consistently more effective as a virucide than chlorination/dechlorination under the conditions of application, based on measurements of virus (phage) diversity and concentration. Taken together, and when considered in conjunction with previously published research, the results of these experiments illustrate several important limitations of common disinfection processes as applied in the treatment of municipal wastewaters. In general, it is not clear that conventional disinfection processes, as commonly implemented, are effective for control of the risks of disease transmission, particularly those associated with viral pathogens. Microbial quality in receiving streams may not be substantially improved by the application of these disinfection processes; under some circumstances, an argument can be made that disinfection may actually yield a decrease in effluent and receiving water quality. Decisions regarding the need for effluent disinfection must account for site-specific characteristics, but it is not clear that disinfection of municipal wastewater effluents is necessary or beneficial for all facilities. When direct human contact or ingestion of municipal wastewater effluents is likely, disinfection may be necessary. Under these circumstances, UV irradiation appears to be superior to chlorination in terms of microbial quality and chemistry and toxicology. This advantage is particularly evident in effluents that contain appreciable quantities of ammonia-nitrogen or organic nitrogen.     

Prediction of physico-chemical properties for PCs/DFs using the UNIFAC model with an alternative approximation for group assignment

The original-type UNIFAC model was used to predict the environmentally important physico-chemical properties of PCDDs/DFs, such as aqueous solubility, Henry's law constant, and 1-octanol/water partition coefficient, through the UNIFAC-derived infinite dilution activity coefficient. In this application, we suggest an alternative approximation that the aromatic ether group AC-O in PCDD/DF molecules is replaced with the aliphatic ether group CH-O, because the AC-O group is not available in the conventional UNIFAC model. With this approximation, the ability of the UNIFAC model to predict those properties was examined by comparing with experimental data. The UNIFAC model provided comparatively good estimation results. From these results, it is shown that the alternative approximation is useful for the UNIFAC estimation of physico-chemical properties for PCDDs/DFs. Furthermore, the predicted solubilities of 2,3,7,8-T4CDD and O8CDD in organic solvents and the co-solvency effect on solubility of PCDDs in methanol/water mixture indicate that the UNIFAC calculation presented here could well predict the physico-chemical properties of PCDDs/DFs in various solution conditions.     

Effect of dissolved humic matters on the leachability of PCDD/F from fly ash--laboratory experiment using Aldrich humic acid

The effect of dissolved humic matters (DHM) on the leachability of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) in fly ash was studied theoretically and in laboratorial condition to verify the previous results for pilot and field experiment of incineration residues landfill. In theoretical review, it was shown that DHM could influence the actual solubility and leachability of PCDD/F. The higher concentration of DHM showed the higher leachability of PCDD/F. In the leaching test, three different DHM concentrations and pHs of solutions were adopted to fly ash samples imaging the various characteristics of municipal solid waste leachate. It was proved experimentally that the leachability of PCDD/F increased with increasing DHM concentration in all pH conditions. The highest leachability was shown at the highest pH. Isomer distribution patterns of PCDD/F in all leachates were similar in all pH conditions. It backed up the distribution theory of PCDD/F between DHM and water.     

Feasibility study of a centralized biogas plant performance in a dairy farming area

Journal of Material Cycles and Waste Management - In this feasibility study, the anaerobic co-digestion of different organic wastes obtained from a dairy farming area in Hokkaido prefecture, Japan...     

Leaching characteristics of rare metal elements and chlorine in fly ash from ash melting plants for metal recovery

In terms of resource recovery and environmental impact, melting furnace fly ash (MFA) is attracting much attention in Japan due to its high metal content. The study aims to obtain fundamental information on using a water extraction method not only to concentrate valuable rare metals but also to remove undesirable substances such as chlorine for their recovery from MFA. The composition and leaching characteristics of MFA was investigated. The results revealed that the metal content in MFA is nearly equal to raw ore quality. The content of Ag, In, Pd, Pb, and Zn is, in fact, higher than the content of raw ore. As for leaching behavior, Ag, Bi, In, Ga, Ge, Sb, Sn, and Te showed the lowest release at a neutral pH range. Pd was leached constantly regardless of pH, but its concentration was quite low. On the other hand, most of the Tl was easily leached, revealing that water extraction is not appropriate for Tl recovery from MFA. Major elements Cl, Ca, Na, and K, occupying about 70% of MFA, were mostly leached regardless of pH. Base metal elements Cu, Pb, and Zn showed minimum solubility at a neutral pH. The leaching ratio of target rare metal elements and base metal elements suggests that the optimal pH for water extraction is 8-10, at which the leaching concentration is minimized. The water extraction process removed most of the Cl, Ca, Na, and K, and the concentration of rare metals and base metals increased by four or five times.     

Factors contributing to seasonal variations in wet deposition fluxes of trace elements at sites along Japan Sea coast

In this study, we measured the wet deposition fluxes of ten trace elements (As, Cd, Cr, Cu, Mn, Ni, Pb, Sb, V and Zn) from December 2002 to March 2006 at three sites along the Japan Sea coast, which have been strongly affected by the long-range transport of air pollutants from the Asian continent. Also, factors, contributing to their seasonal variations were investigated. At the northern and central sites, the monthly wet deposition fluxes of all or most trace elements greatly increased during the cold season (typically, November–April), along with their monthly average (volume-weighted) concentrations in the precipitation. The cold/warm season ratios for the average concentrations of trace elements in precipitation were within the range of 2.7–5.1 at the northern site and 1.8–5.9 at the central site, which were similar to the average scavenging ratios (= concentration in precipitation/concentration in air) at each site. However, there were small differences (0.47–1.2 at the northern site and 0.73–1.7 at the central site) in the ratios of average concentrations in air between the two seasons. These suggest that the increase in the wet deposition fluxes of trace elements during the cold season is due to increases in their scavenging ratios. On the other hand, the result for the southern site was different from those at the other sites. The number of days when the daily maximum wind speed exceeded 10 m s^?1 at the meteorological observatories near the study sites increased markedly during the cold season at the northern and central sites, showing that strong winds usually blow during the cold season at those sites, but not at the southern site. Higher wind speed transports larger amounts of constituents into the cloud system, which can result in their increased concentrations in precipitation. Thus, high scavenging ratios of trace elements during the cold season may be caused by the increase in their amounts of discharge into the cloud system owing to high wind speed, suggesting that wind speed is an important factor in the seasonal variations in the wet deposition fluxes.     

Environmental risk assessment and concentration trend of atmospheric volatile organic compounds in Hyogo Prefecture, Japan

Purpose  

The purpose of this study was to evaluate the influences of volatile organic compounds (VOCs) emissions on hazardousness and photochemical reactivity and to propose efficient VOCs abatement strategies.